Palram Canopia Harmony 6ft x 4ft Green Polycarbonate Greenhouse (1.85m x 1.26m)

The Palram Canopia Harmony 6ft x 4ft Green Polycarbonate Greenhouse (1.85m x 1.26m) is a compact apex-roof greenhouse built for smaller gardens. Product 701635 gives you a 2.31m² floor footprint enough to grow tomatoes, peppers and seedlings without taking over your outdoor space.

The frame is rust-resistant green aluminium sitting on a galvanised steel perimeter base. Glazing is 0.7mm polycarbonate using Fine Shield Technology™ shatterproof, fracture-proof and rated to 90% light transmission. It handles winds up to 90km/hr and snow loads of 75kg/m². The panels are UV-protected and won't discolour or fade.

A manually opened roof vent lets you regulate temperature. There is no auto vent included. No staging is included but shelves and a workbench are available separately. Integrated rain gutters collect runoff for watering. You can realistically grow two or three tomato plants on the floor and use wall space for climbing crops.

Pre-cut polycarbonate panels slide into place for straightforward DIY assembly. No floor is included so you must fix it to a solid level base. It comes with a 5-year limited warranty and is described as maintenance free.

The green aluminium frame sections support 0.7mm polycarbonate panels using Fine Shield Technology™. Panels slide into uniform-profile channels rather than being clipped or screwed. The galvanised steel perimeter base anchors the structure and resists ground moisture. The apex roof sheds rain efficiently and is rated to 75kg/m² snow load. Wind resistance is tested to 90km/hr. The single manually operated roof vent is hinged at the ridge. UV treatment is applied to the polycarbonate to prevent yellowing and protect plants from harmful rays.

The frame is green powder coated aluminium. The perimeter base is galvanised steel. Glazing is 0.7mm crystal-clear polycarbonate using Fine Shield Technology™ UV-protected, shatterproof and fracture-proof. The roof panels are also polycarbonate. No timber or glass is used in this greenhouse.

No floor is included with this greenhouse. It must be fixed to a solid level base before assembly. A concrete slab or firm paving is the recommended surface. You will need to prepare and level the ground yourself before installation. No base or flooring is supplied with the greenhouse.

The greenhouse arrives flat packed for DIY assembly. Pre-cut polycarbonate panels with uniform profiles slide into the aluminium frame channels. No specific assembly time is stated by the manufacturer. Two people are advisable to keep the frame steady during panel fitting. All installation hardware is included. No specialist tools are listed as required.

The 1.85m x 1.26m floor gives you roughly 2.3m² of growing space. You can fit two standard grow bags on the floor for tomatoes or peppers that is around four to six plants. Add a staging shelf along one side and you gain space for seed trays in spring. In summer the floor handles tomatoes, cucumbers or chillies. In autumn and winter use it to overwinter tender plants like fuchsias or pelargoniums. The 2080mm ridge height gives enough clearance for tall cordon tomatoes.

The Palram Canopia Harmony is described as completely maintenance free. The polycarbonate panels won't discolour or fade and the aluminium frame won't rust. Wipe down panels periodically to maintain light transmission. Clear the integrated gutters of debris to keep water flowing freely. Check the roof vent mechanism opens and closes smoothly each season.

At 1.85m x 1.26m this greenhouse suits a patio corner or a narrow garden border. You need clearance on the door side to open it fully allow at least 600mm. The roof vent opens upward so no side clearance is needed for that. It should not be placed directly against a fence as you need access to fix it to its base. The compact footprint still gives you usable bench and floor space on both sides.