Palram Canopia Hybrid 6x8 Walk-In Silver Polycarbonate Greenhouse

The Palram Canopia Hybrid 6x8 is a walk-in polycarbonate greenhouse with a footprint of 1.85m x 2.47m (6ft x 8ft). That gives you just over 4.5 square metres of growing space enough for two grow bags on the floor and staging along both sides. Product 701572HD is built on a galvanised steel perimeter base with a rust-resistant silver aluminium frame.

The 4mm twin-wall polycarbonate roof panels deliver 82% light transmission while blocking harmful UV rays. The 0.7mm crystal-clear side panels transmit 90% of available light. The frame uses Fine Shield Technology™ and is wind resistant to 90km/h and snow-load tested to 75kg/m². Panels are shatterproof and fracture-proof and won't discolour or fade.

A manually-opened roof vent lets you regulate temperature without automation. There are no auto vents included. No staging is supplied but the floor space suits two standard grow bags for tomatoes or peppers. Seed trays fit well on added shelving. Integrated rain gutters collect rainwater sustainably. The single door fits left or right-hand opening with a magnetic catch and padlock fixing.

Backed by a 5-year limited warranty this maintenance-free greenhouse is a solid year-round growing structure for small gardens.

The silver aluminium frame uses Fine Shield Technology™ rated to resist winds of 90km/h and snow loads of 75kg/m². The apex roof pitch sheds rainwater into the integrated gutters. The 4mm twin-wall polycarbonate roof panels create an insulating air gap that reduces temperature swings and blocks UV. The 0.7mm crystal-clear side panels are shatterproof and fracture-proof. Pre-cut panels with uniform profiles slide into aluminium channels no drilling through glazing required. The single manual roof vent is adjusted by hand to control internal temperature.

The frame is rust-resistant aluminium with a silver UV-treated finish sitting on a galvanised steel perimeter base. The roof uses 4mm twin-wall polycarbonate panels. The side walls use 0.7mm crystal-clear polycarbonate. All panels are shatterproof, fracture-proof and UV protected so they will not discolour or fade.

No floor is included. The greenhouse must be fixed to a solid level base such as a concrete slab or firm paving before assembly. You will need to prepare and level the base yourself before the greenhouse arrives. The galvanised steel perimeter base sits on top of your prepared surface.

Panels are pre-cut with uniform profiles and slide into place no cutting required. Assembly is designed to be straightforward for a DIY build. Two people are recommended to hold sections steady during the build. All fixings are supplied. The sliding panel system means no specialist tools are needed. Allow a full day for two people to complete the build comfortably.

The 1.85m x 2.47m floor gives you room for two standard grow bags side by side that is six tomato or pepper plants on the floor. Add a staging shelf along one side and you gain space for seed trays and pot plants. In spring use the bench for seed sowing and propagation. In summer grow tomatoes, cucumbers or chillies on the floor. In winter the twin-wall roof insulation helps protect tender plants from frost add the optional fan heater for reliable frost-free conditions.

The aluminium frame and polycarbonate panels are maintenance-free. Wipe panels down with a soft cloth and mild detergent to keep light transmission at its best. Clear the integrated gutters of leaves and debris regularly. The UV treatment on the panels means no retreatment is needed and the panels will not discolour or fade over time.

At 1.85m wide and 2.47m deep this greenhouse fits into a modest garden plot. You need clearance of around 600mm on the door side to open it fully and access the interior. The apex roof sheds rain efficiently so it can sit close to a fence on the non-door sides. The perimeter base keeps the footprint defined and tidy.