Forest Garden Wallscape 4ft x 6ft Lean To Greenhouse with Glazed Back

The Forest Garden Wallscape Lean To Greenhouse (LTGH46WBHDBUN) measures 4ft x 6ft (1.28m x 1.93m) giving you a practical growing footprint in a compact space. It is built to sit against a wall or fence making it ideal for courtyards and patios where space is tight. The glazed back panel means it pulls in light from all sides if you site it away from a wall.

The frame is 28mm x 28mm with 12mm shiplap tongue and groove cladding. That tight interlocking shiplap seal keeps the interior dry in wet weather. The timber is FSC certified and pressure treated so no further treatment is needed. It carries a 15-year anti-rot guarantee. Glazing is acrylic throughout shatterproof scratch-resistant and safer than horticultural glass.

A large opening roof vent regulates temperature inside. The single door fits at either end of the structure to suit your layout. The door uses a drop latch and turn buttons to stay secure. No floor is included so you choose your own base. No staging is included but a potting bench is available separately.

The 15-year anti-rot guarantee and FSC-certified pressure treated timber make this a long-term buy. Three back panel options and three sizes are available. Free delivery to most UK addresses. Constructed in the UK.

The 28mm x 28mm timber frame sections give a solid structural base without bulk. The 12mm shiplap tongue and groove cladding locks together tightly to shed rain and resist wind pressure. Acrylic glazing panels are 28mm thick on the roof and sit in rebated frame sections. Acrylic is lighter than glass and will not shatter. The pent roof pitches away from the wall to drain water clear. The large opening roof vent is hinged at the top and props open to release heat. The pressure treatment penetrates the timber fibres to resist rot from the inside out.

The frame is FSC certified pressure treated rough sawn timber with 28mm x 28mm sections. Cladding is 12mm shiplap tongue and groove timber. Glazing and roof panels are shatterproof scratch-resistant acrylic. No glass is used anywhere in the structure. Constructed in the UK.

No floor is included with this greenhouse. You must prepare a level base before assembly. A concrete slab or level paving is the recommended foundation. The structure must sit on something flat and stable. Ground preparation is entirely the buyer's responsibility before the greenhouse is built.

This greenhouse arrives flat packed with all fixings and instructions included. It is a DIY self-assembly build. Due to the 140kg packaged weight and panel sizes two people are needed. Allow a full day for assembly. Professional installation is available as an add-on service if preferred. No special tools are specified but a level base must be ready before you start.

The floor area of roughly 1.18m x 1.83m fits two standard grow bags side by side on the ground. That gives you space for six to eight tomato or pepper plants in summer. In spring use the floor space for seed trays and module trays to get early sowings going. A potting bench along one side wall leaves floor space free for taller crops. In autumn and winter use the space to overwinter tender fuchsias, pelargoniums and pot-grown citrus. The 2061mm ridge height gives enough clearance for tall cordon tomatoes.

The pressure treated timber needs no further retreatment to keep the 15-year anti-rot guarantee valid. Wipe down the acrylic glazing panels with a soft cloth and mild soapy water to keep them clear. Check that all fixings are tight each spring. Clear any debris from the roof and check the roof vent opens freely each season.

This lean to greenhouse is designed to sit against a wall or fence saving space on three sides. The 1.28m width means it fits on a narrow patio or along a side passage. Leave at least 600mm clearance at the door end to open it fully. The glazed back panel means it also works as a free-standing structure. The pent roof sheds water away from the wall cleanly.