Palram Canopia Rion White Sun Room Wall Greenhouse 6ft x 6ft (1.8m x 1.8m)

The Palram Canopia Rion White Sun Room Wall Greenhouse (SKU 702482) is a 6ft x 6ft (1.8m x 1.8m) pent-roof structure that works as a greenhouse, sun room or conservatory. That 1.96m x 1.98m base footprint gives a small garden a proper growing space without eating up the whole plot.

The thick white resin frame has its central profiles reinforced with galvanised steel rods for real rigidity. The roof uses 4mm twin-wall polycarbonate panels and the sides use crystal-clear 3mm polycarbonate. Both panel types are fully UV-protected and the structure is wind resistant to 90km/hr and snow-load tested to 75kg/m². The frame is completely maintenance free and resists rust, rot and corrosion.

A manually opened roof vent lets you regulate temperature. The door can be positioned at either end of the structure. The 4mm roof panels allow 82% light transmission while the 3mm side panels deliver 90% light transmission so plants get strong growing light year-round. No staging is included but the floor space suits grow bags and pots.

The sliding panel assembly system makes building it straightforward. A 7-year limited warranty is included. No floor is supplied so fix it to a solid level base.

The resin frame uses thick white profiles with galvanised steel rods running through the central sections to prevent flex and racking. Panels slide into aluminium profiles rather than being clipped or screwed making the joint weather-tight and simple to assemble. The 4mm twin-wall polycarbonate roof traps an air layer for thermal insulation and allows 82% light transmission. The 3mm single-wall side panels are crystal clear at 90% light transmission. Both panel types are fully UV-protected. The pent roof pitch sheds rain efficiently. The structure is tested to resist wind at 90km/hr and snow loads of 75kg/m².

The frame is white UV-treated resin with galvanised steel rods reinforcing the central profiles. The roof uses 4mm twin-wall polycarbonate panels. The side walls use crystal-clear 3mm polycarbonate panels. Both panel types are shatterproof fracture-proof and fully UV-protected. The frame resists rust rot and corrosion.

No floor is included with this greenhouse. It must be fixed to a solid level base such as a concrete slab or paving slabs. You will need to prepare and level the ground yourself before building. No base or flooring is supplied with the product.

This greenhouse uses a sliding panel system where aluminium profiles allow panels to slide into place. It is a DIY flat-pack build and two people are recommended. All fixings are supplied. The sliding system is designed to make assembly straightforward without specialist tools. Allow a full day for two people to complete the build comfortably.

The 1.96m x 1.98m floor fits two standard grow bags side by side with room for pots along the sides. That gives space for around 6 tomato plants or 4 pepper plants in bags. In spring use the floor and any added staging for seed trays. In summer tomatoes peppers and cucumbers thrive with the roof vent open on hot days. In autumn and winter the twin-wall polycarbonate roof insulates well enough to overwinter tender plants like fuchsias and pelargoniums. Add the optional fan heater to keep frost at bay.

The resin frame is completely maintenance free and needs no painting or treating. Wipe the polycarbonate panels down with a soft cloth and mild soapy water to keep light transmission high. Check the roof vent opens and closes freely each season. No annual retreatment is required.

At 2.0m x 2.0m including overhang this greenhouse fits into a corner or against a fence. The door can be placed at either end so you can position it to suit access. Allow around 600mm clearance in front of the door to open it fully. The pent roof sits flush and low so it does not overshadow other plants. The floor-to-ridge height of 2470mm makes good use of vertical space in a tight plot.